Carbon steel sheet

S400 Low Temperature Carbon Steel Plate Sheet

Carbon steel is an iron-carbon alloy with a carbon content of 0.0218%~2.11%, also known as carbon steel. It also contains small amounts of silicon, manganese, sulfur and phosphorus. In general, the higher the carbon content of carbon steel, the greater the hardness, the higher the strength, but the lower the plasticity....

Sales hotline+86-531-88752665

Emailsales@zhishangsteel.com

Detailed introduction

parameter

Name	ASTM A36 A572 GR50 S355 4x8 cast iron metal sheets mild carbon steel plates s235jr carbon steel plate
Width	600mm-3000mm or as required
Thickness	1mm-100mm or as required
Length	1000mm-12000mm or as required
Standard	AiSi, ASTM, bs, DIN, GB, JIS, A36
Material	Q195，Q235，Q235A, Q235B, Q345B, SPHC, SPHD, SS400，ASTM A36, S235JR, S275JR, S345JR, S355JOH, S355J2H, ASTM A283, ST37, ST52，ASTM A252 Gr. 2(3), ASTM A572 Gr. 500, ASTM A500 Gr. A(B, C, D) and so on
Inspection	Fully accept all the third party to test before shipment.
Packing	Standard Export Seaworthy Package.Suit for all kinds of transport,or as required.
Payment Terms	L/C, T/T

Carbon Steel Plate/Sheet

Carbon steel is an iron-carbon alloy with a carbon content of 0.0218%~2.11%, also known as carbon steel. It also contains small amounts of silicon, manganese, sulfur and phosphorus. In general, the higher the carbon content of carbon steel, the greater the hardness, the higher the strength, but the lower the plasticity.

According to the carbon content and use of different, roughly divided into three categories:

1. less than 0.25%C is low carbon steel, especially with carbon less than 0.10% of 08F, 08Al, because of its good deep drawing and weldability and is used as a deep drawing parts such as automobiles, cans...... And 20G is the main material for ordinary boilers. In addition, mild steel is also the most popular as carburizing steel, used in machinery manufacturing.

2. 0.25 ~ 0.60%C is medium carbon steel, mostly used in the condition of conditioning, the production of machinery manufacturing industry parts. How many conditioning 22~34HRC, can get comprehensive mechanical properties, but also easy to cut.

3. Higher than 0.6%C is high carbon steel, which is mostly used for manufacturing springs, gears, rolls, etc. According to the different manganese content, it can be divided into ordinary manganese content (0.25 ~ 0.8%) and higher manganese content (0.7 ~ 1.0% and 0.9 ~ 1.2%) two steel groups. Manganese can improve the hardenability of steel, strengthen ferrite, and improve the yield strength, tensile strength and durability of steel. Usually, "Mn" is added after the grade of steel with high manganese content, such as 15Mn and 20Mn, to distinguish it from carbon steel with normal manganese content.

Carbon tool steel carbon content between 0.65 ~ 1.35%, after heat treatment can get high hardness and high strength, mainly used in the manufacture of various tools, cutting tools, molds and measuring tools